Do you want to create your own Internet radio station or enrich your radio vocabulary? In this glossary you will find a number of terms you may come across when you enter the world of radio broadcasting. We hope that it will be able to help and accompany you throughout your adventure:
A – B – C – D – E – F – G – H – I – J – K – L – M – N – O – P – Q – R – S – T – V – W – X – Y
Ad-libbing is when the radio presenter improvises. This often happens when something doesn’t go according to plan, or due to a technical issue.
Audience refers to a set of listeners who are listening to a program at a given time. To see the audience of a radio station, you can refer to the statistics section of your Radio Manager.
Automation includes software or equipment such as mixing desks. They allow the presenters, and more particularly the person in charge of programming, to automate the tasks related to the broadcasting of a radio station.
Bandwidth is a set of data transmitted between a radio station and its listeners. This bandwidth is provided by a host and its cost depends on the quantity and quality of the data sent. The higher the number of listeners, the higher the cost. For more information, we invite you to take a look at this article.
A musical element of 1 to 6 minutes (voiceless) that is used to accompany your spoken interventions.
The rate at which bits are transferred from one location to another. In other words, it measures how much data is transmitted in a given amount of time. Bitrate is commonly measured in kilobits per second (Kbps).
A popular term for headphones.
DAB+, or Digital Audio Broadcasting, is the digital successor to FM. It’s also known as digital terrestrial radio (DTT). DAB+ is an audio stream transmitted over the air like analog FM. It’s now widely used in many countries in Europe and around the world to replace the FM band.
Unlike live broadcasting, deferred broadcasting is a program that has been recorded in advance and broadcast later.
Feedback is a rumbling or whistling noise caused by a sound system. This occurs when audio is picked up from a speaker through a microphone, which means that loud environments tend to produce more feedback.
FM Radio is a process that allows the broadcasting of programs in frequency modulation. FM frequencies are broadcast by transmitters located on the outskirts of cities and intercepted by the radio antenna of your car or your home radio set. This signal is then received and retransmitted through the speakers. Reserved for large national and local radio stations, this broadcasting system is doomed to disappear in favour of Internet broadcasting and DAB+.
A term used to talk about volume.
Term for on-air talent, radio personality or presenter.
Radio imaging is a term used to group together a multitude of sound effects such as jingles, sweepers, hourly announcements or even self-promotion! They are used to create the sound identity of a radio station, but they also help to give listeners clues to identify the content broadcast (programs, interviews, etc.).
A conversation during which a radio host asks a guest questions on one or more topics. The interview can take place in the studio, by telephone or directly in the field.
A radio jingle is a 5 – 15 second sound element that incorporates the name and slogan of the radio station.
The total time that listeners spend on your radio.
Example: If 20 listeners listen to your stream for 1 hour, the number of listening hours consumed will be 20 hours.
The listening link is a URL that gives direct access to the audio source of an online radio station. It’s also used to reference the radio on different listening directories. Here’s what a listening link looks like: https://www.radioking.com/play/my-radio
Software that allows you to broadcast live on your Internet radio station. Simply choose your preferred broadcasting software and configure your radio stream. Here at RadioKing, we recommend using Mixx (available on Windows & Mac).
Loudness normalization is a technical process that allows tracks to be put at a same volume perceived by the listener. When songs are recorded, they are not always encoded in the same way which results in variations in volume between different songs.
Mic is an abbreviation for microphone.
A mixer, also known as a mixing desk, is a tool for mixing several sound sources. For example, it allows you to group all the inputs to a single output and to adjust the level of each input independently. You can add multiple microphones, headphones and even set up a telephone line dedicated to your radio.
Term used to indicate that the radio station is broadcasting.
Peak normalization allows you to apply gain (volume) to your music without affecting its sound dynamics. Put simply, your song will be “louder” or “quieter” to fit an indicator used for all of your music, without altering the volume differences within a file.
Condenser microphones require extra power (known as phantom power) to work correctly.
Phantom power supplies are often built into mixers, microphone preamplifiers and similar audio equipment so make sure to keep an eye out for the 48V button/switch.
A playlist is a list of recorded songs or pieces of music chosen to be broadcast on a radio show or by a particular radio station.
The program director (or station manager) is a true conductor. This person directs the outlines of the radio station and decides on the program schedule.
A program grid gives you an overview of the different programs scheduled on a weekly basis.
A supporting framework that holds technical equipment.
Refers to retransmitting (relaying) a stream from another source or server.
Royalties are paid to the artists, composers and publishers that you broadcast on your radio station. They are collected by various collecting bodies. If you wish to broadcast commercial music, you will need to obtain a music license. To do so, we invite you to contact the relevant music authorities in the country that you are broadcasting from. You may find this article helpful.
A script is a document that outlines the course of a program. It sets the rhythm for everyone, whether it is the guests’ interventions or the radio host’s own. To find out how to write a great radio script, take a look at this article.
Radio term that designates the smooth transition from one song to another.
A radio spot is another word for a commercial or advert. They generally last between 20 – 40 seconds.
An 8 to 20 second sound element broadcast every hour, on the hour, to announce the time. It helps give the rhythm of your antenna over a 12 or 24 hour period.
Voice-tracking is a technique that invites the presenter to pre-record all of their interventions, and then broadcast them as part of a musical program.
A windscreen is a foam protection that is put on the head of a microphone to help reduce unwanted surrounding noises. They can be customized by some companies to give a more professional look to your radio.
This is a type of three-pin connector dedicated to audio equipment. It is commonly used to connect the microphone to a mixing console.
We hope that this article has clarified the meaning of these popular radio terms. If you have further questions or if you want to start your own Internet radio station, we are here to help!
As the festive season approaches, online radio stations have a unique opportunity to captivate their…
In today’s digital world, having an online radio station is a fantastic way to reach…
Having an online radio station is exciting. You’re broadcasting your content to the world, sharing…
Tired of the same old playlists and looking to discover new music or shows? Internet…
Needless to say that over the past few years, the Internet has become an essential…
In the past few years, artificial intelligence (AI) has evolved from a futuristic concept to…